H3C S7500E Series

72
PCB 2 Ver : VER.B
FPGA Ver : 001
BootRom Ver : 300
CPLD 1 Ver : 006
CPLD 2 Ver : 006
Table 19 Output description
Field Description
Slot No. Slot number of the card
Brd Type/Type Card model. If this field is NONE, no card is in the slot.
Brd Status/Status
Running status of the card:
• Master—The card is an active SRPU.
• Slave—The card is a standby SRPU.
• Absent—no card is in the slot.
• Fault—the card is booting or the card has failed.
• Normal—the card is an LPU that is correctly operating.
Subslot Num The maximum number of sub-cards supported by the card.
Sft Ver/ Software Ver Software version of the card
Patch Ver Patch version of the card. If this field is NONE, no patch is installed on the card.
PCB 1 Ver Version of PCB 1 on the card
FPGA Ver FPGA version of the card
BootRom Ver Boot ROM version of the card
CPLD 1 Ver Version of CPLD 1 on the card
Chip Chip number of the card
Learning Mode
MAC learning mode of the card:
• Independent VLAN learning (IVL)
• Shared VLAN learning (SVL)
Displaying electronic card label information
Use the display device manuinfo command to display the electronic label of a card, including the card
name, serial number, manufacturing date, MAC address, and vendor name. You can use this information
to verify that the card is genuine.
<Sysname> display device manuinfo
Slot 0:
DEVICE_NAME : LSQM1SRP2XB0
DEVICE_SERIAL_NUMBER : 210231A73JB098000078
MAC_ADDRESS : 0023-895F-958B
MANUFACTURING_DATE : 2009-8-24
VENDOR_NAME : H3C
Slot 1:
DEVICE_NAME : LSQM1SRP2XB0
DEVICE_SERIAL_NUMBER : 210231A73JB098000070
MAC_ADDRESS : 0023-895F-954F