12
Installing the switch
This chapter includes these sections:
• Installation flow
• Inspecting the switch
• Installing slide rails and cage nuts to the rack
• Installing accessori
e
s to the chassis
• Mounting the switch to the rack
• Connecting the PGND cable
IMPORTANT:
Keep the packages of the switch and the components for future use.
Installation flow
Figure 5 Installation flow
Start
Check before
installation
Install slide rails and cage
nuts to the rack
Install accessories to the
chassis
Install the switch
to the rack
End
Connect the PGND cable
Table 7 Description on the installation flow
Step Remarks
Inspecting the switch Preparations before installation
Installing slide rails and
cage nuts to the rack
• For how to install slide rails, see “Installing slide rails.”
• For how to install cage nuts, see “Installing cage nuts for mounting brackets.”
To Next Page
Loading...
Need help?
General
