6 - Maintenance
162
Compressed air system
Draining air tanks
±
ALERTE! Air tanks may contain a residual air pressure!
• Drain the air tanks for condensed water by opening the drain valve..
÷
Air tank number depends of the equipment
The air is filtered and lubricated for a proper operation of equipments.
Drain the condensed water from the air filter device
• Drain the bowl for condensed water by pressing plunger (1)
÷
NOTE! Draining is possible when the circuit is under pressure.
Replenish oil
÷
NOTE! To avoid splatter, depressurize the air system before
dismantling the bowl.
• Press the clip (2) to unlock the protective bowl.
• Turn 1/8 turn to remove the protective bowl.
• Turn 1/4 turn the tank (4) to dismantle it.
÷
NOTE! The lubricator is designed to operate only with a special
lubricant for pneumatic systems (recommended lubricant – reference: 6HU8000.
1. Front right air tank for suspension
2. Front left air tank for suspension
3. Main air tank
4. Rear air tank for suspension
To Next Page
Loading...
Need help?
General
