2 - General Safety Instructions
24
Service and Maintenance Work
Statutory Inspection
A surveyor must complete a statutory inspection of the sprayer prior to connecting the two.
Each country should regulate the level and frequency of this inspection. Contact your local HARDI dealer for more
information, before using the sprayer the first time.
Preventive Measures
Before carrying out service and maintenance work, secure all media against unintentional start-up. This goes for:
Hydraulic system
• turn off the vehicle and remove the ignition key
Electric system
• turn off the vehicle and remove the ignition key
Fluid system
• turn off the vehicle and remove the ignition key.
Compressed air
• turn off the vehicle and remove the ignition key
• Depressurize the compressed air circuit
Carry out prescribed service, maintenance and inspection work in due time. This will help to eliminate faults on the sprayer,
including safety related functions.
Carefully fix and secure larger components to lifting gear when carrying out replacement work.
Check all the screw and bolt connections for firm seating. On completion of the maintenance work, check the function of the
safety devices.
To Next Page
Loading...
Need help?
General
