GigE Area Scan Camera User Manual
104
Figure 12-24 Set Parameters
3. Click OK.
12.11 Update Firmware
The device supports updating firmware via the MVS client software.
Note
●
Make sure that the power cable and others are properly connected.
●
Use the firmware package of the corresponding device model for updating.
Steps
1. Go to Tool → Firmware Updater to open the update window.
2. Select corresponding device type like GigE, USB, or Camera Link.
3. Check to select the device you want to update.
4. Click to select update files (.dav files) in the local PC.
5. Click Update to start updating.
Figure 12-25 Update Firmware
To Next Page
Loading...
