GigE Area Scan Camera User Manual
2
Chapter 2 Appearance
Note
●
For specific appearance and dimension, please refer to the device’s specification for
details.
●
The appearance is subject to change, and the actual device you purchased shall prevail.
The specific device appearance types are as follows:
●
Type I device: It is a device with dimension of 29 mm × 29 mm × 42 mm.
●
Type II device: It is a device with dimension of 29 mm × 29 mm × 42 mm, and it can be
mounted from four sides.
●
Type III device: It is CU series device with dimension of 29 mm × 29 mm × 42 mm.
●
Type IV device: It is a device with dimension of 29 mm × 44 mm × 59 mm.
●
Type V device: It is a device with M58-mount, but has no cooling fan.
●
Type VI device: It is a device with F-mount, but has no cooling fan.
●
Type VII device: It is a device with M58-mount, and has cooling fan.
●
Type VIII device: It is a device with F-mount, and has cooling fan.
To Next Page
Loading...
