HikRobot GigE - Page 27

GigE Area Scan Camera User Manual
16
Click in the device’s feature panel to unfold the specific parameters, and set them
according to actual demands.
Note
The device’s feature tree and parameters may differ by device models.
Table 6-2 Feature Tree Description
Feature Name
Description
Device Control
You can view the device information, edit its name, reset the
device, etc.
Image Format Control
You can view and set the device’s resolution, image reverse
function, pixel format, region of interest, test pattern, etc.
Acquisition Control
You can view and set the device’s acquisition mode, frame rate,
trigger mode, exposure time, etc.
Analog Control
You can view and set the device’s gain, black level, Gamma
correction, sharpness, etc.
Color Transformation
Control
You can view and set the device’s color transformation related
parameters like hue and saturation.
LUT Control
You can view the Look-Up Table (LUT), and set its index and value.
Shading Correction
You can set shading correction to correct shade.
Digital IO Control
You can set the different input and output signals.
Action Control
You can view and set the device’s action control related
parameters.
Counter and Timer Control
You can view and set the counter-related parameters.
File Access Control
You can view and set the device’s file access control related
parameters.
Sequencer Control
You can view and set the device’s sequencer related parameters.
Event Control
You can view and set the device’s event control related parameters
to let the device generate an event and transmit a related event
message to the computer.
Chunk Data Control
You can view and set the device’s chunk data control related
parameters to generate supplementary image data and append
that data to every image that you acquire.
Transport Layer Control
You can view and set the parameters of the device’s transport
layer.
User Set Control
You can save or load the device’s parameters.