HikRobot GigE - Page 95

GigE Area Scan Camera User Manual
84
Parameter
Read/Write
Description
write
control.
Device Connection Speed
(Mbps)
Read only
It indicates the speed of transmission of the
specified connection.
Device Link Selector
Read and
write
It selects which Link of the device to control
Device Link Speed (Mbps)
Read only
It indicates the speed of transmission
negotiated on the specified link.
Device Link Connection
Count
Read only
It returns the number of physical connection of
the device used by a particular link.
Device Link Heartbeat Mode
Read and
write
It activates or deactivates the link's heartbeat.
Device Stream Channel
Count
Read only
It indicates the number of streaming channels
supported by the device.
Device Stream Channel
Selector
Read and
write
It selects the stream channel to control.
Device Stream Channel
Type
Read only
It reports the type of the stream channel.
Device Stream Channel Link
Read only
It is the index of device's Link to use for
streaming the specified stream channel.
Device Stream Channel
Endianness
Read only
It is the endianness of multi-byte pixel data for
this stream.
Device Stream Channel
Packet Size (B)
Read and
write
It specifies the stream packet size, in bytes, to
send on the selected channel for a transmitter
or specifies the maximum packet size
supported by a receiver.
Device Event Channel Count
Read only
It indicates the number of event channels
supported by the device.
Device Character Set
Read only
It is character set used by the strings of the
device's bootstrap registers.
Device Temperature
Selector
Read and
write
It selects device component to view its
temperature. Currently, only sensor can be
selected only.
Device Temperature
Read only
It displays the temperature of selected
components in Device Temperature Selector.
Find Me
Read and
write
The function of finding me is executed. Click
Execute to find the currently operating device.