Figure 13-17 HTTP Authencaon
2.
Check Enable HTTP.
3. Select HTTP Authencaon Type.
Note
Two authencaon types are selectable, for security reasons, it is recommended to select
digest as the authencaon type.
4. Click Apply to save the sengs.
5. Restart the device to take eect the sengs.
13.10.4 IP Camera
Occupaon Detecon
Aer enabling the feature, when search IP camera in Number of Unadded Online Device interface,
the status of IP camera the has been added by other device will show as
Steps
1. Go to System → System Service → System Service .
2. Check Enable IP Camera
Occupaon Detecon.
3. Click Apply to save the sengs. And reboot device to take eect the sengs.
Network Video Recorder User Manual
155