HIKVISION DeepinMind Series - Set a Pattern; Call a Pattern

Figure 3-18 Patrol Conguraon
3. Select a patrol.
4. Click Call to start the patrol.
5.
Oponal: Click Stop to stop the patrol.
3.11.6 Set a
Paern
Paerns can be set by recording the movement of the PTZ. You can call the paern to make the
PTZ move according to the predened path.
Steps
1. Click on the quick sengs toolbar of the PTZ camera's live view.
2. Click
Paern to congure a paern.
Figure 3-19
Paern Conguraon
3. Select the paern No.
4. Set the paern.
1) Click Record to start recording.
2) Click corresponding buons on the control panel to move the PTZ camera.
3) Click Stop to stop recording. The PTZ movement is recorded as the
paern.
3.11.7 Call a
Paern
Follow the procedure to move the PTZ camera according to the predened paerns.
Steps
1. Click on the quick sengs toolbar of the PTZ camera's live view.
2. Click
Paern to congure paern.
Network Video Recorder User Manual
34