HIKVISION DeepinMind Series - Configure Motion Detection Triggered Recording; Configure Event Triggered Recording; Configure Alarm Triggered Recording

4.1.7 Congure Moon Detecon Triggered Recording
You can congure the recording triggered by the moon detecon event.
Steps
1. Go to System → Event → Normal Event →
Moon Detecon .
2.
Congure the moon detecon and select the channel (s) to trigger the recording when moon
event occurs. Refer to Congure Linkage Acons for details.
3. Go to Camera → Encoding Parameters → Recording Parameters .
4. Set the event main stream/sub-stream recording parameters for the camera.
5. Go to Storage → Recording Schedule .
6. Select the recording type to
Moon.
7. Drag the mouse on the me bar to set moon detecon recording schedule. Refer to Congure
Plan Recording for details.
4.1.8
Congure Event Triggered Recording
You can congure the recording triggered by the moon detecon, moon detecon and alarm,
face
detecon, vehicle detecon, line crossing detecon, etc.
Steps
1. Go to System → Event .
2. Congure the event detecon and select the channel(s) to trigger the recording when event
occurs. Refer to Event for details.
3. Go to Camera → Encoding Parameters → Recording Parameters .
4. Set the event main stream/sub-stream recording parameters for the camera.
5. Go to Storage → Recording Schedule .
6. Select the recording type to Event.
7. Drag the mouse on the
me bar to set the event detecon recording schedule. Refer to
Congure Plan Recording for details.
4.1.9
Congure Alarm Triggered Recording
You can congure the recording triggered by the moon detecon, face detecon, vehicle
detecon, line crossing detecon, etc.
Steps
1. Go to System → Event → Normal Event → Alarm Input .
2.
Congure the alarm input and select the channel(s) to trigger the recording when alarm occurs.
Refer to Event for details.
3. Go to Camera → Encoding Parameters → Recording Parameters .
4. Set the event main stream/sub-stream recording parameters for the camera.
5. Go to Storage → Recording Schedule .
6. Select the recording type to Alarm.
Network Video Recorder User Manual
43