Figure 5-4 People Gathering Detecon
4. Check Enable People Gathering Detecon.
5. Oponal: Check Save VCA Picture to save the captured people gathering detecon pictures.
6. Set people gathering detecon parameters.
1) Select Arming Region. Up to 4 regions are selectable.
2) Click Draw Area to draw a quadrilateral in the preview window by specifying four
verces of
the area.
3) Set Percentage.
Percentage
The percentage refers to the density of human bodies within the area. If it exceeds the
threshold value, the device will trigger alarm.
7. Set the arming schedule. Refer to
Congure Arming Schedule .
8. Set the linkage
acons. Refer to Congure Linkage Acons .
9. Click Apply.
5.2.3 Fast Moving
Detecon
Fast moving detecon is used to detect suspicious running and chasing, over speed and fast
moving. It will trigger alarm when an object is moving fast and send nocaon to arming host so
that necessary
acons can be taken in advance.
Steps
1. Go to Smart Analysis → Smart Event Sengs → Other Events .
2. Select a camera.
3. Click Fast Moving.
Network Video Recorder User Manual
60