HIKVISION DeepinMind Series - Detection

Note
• You can pause/resume or cancel the
detecon.
• Aer tesng has been completed, you can click Error informaon to see the detailed damage
informaon.
13.4.2 S.M.A.R.T. Detecon
HDD detecon funcons such as the adopng of the S.M.A.R.T. and the Bad Sector Detecon
techniques. S.M.A.R.T. (Self-Monitoring, Analysis and Reporng Technology) are HDD monitoring
systems to detect various reliability indicators in the hopes of ancipang failures.
Steps
1. Go to Maintenance → HDD
Operaon → S.M.A.R.T .
2. Select the HDD to view its S.M.A.R.T. informaon list.
3. Set Self-Test Type.
4. Click Self-Test to start the S.M.A.R.T. HDD
self-evaluaon.
Figure 13-6 S.M.A.R.T. Sengs Interface
Note
To use the HDD even when the S.M.A.R.T. checking has failed, check Connue to use the disk
when self-evaluaon is failed.
The related informaon of the S.M.A.R.T. is shown, and you can check the HDD status.
Network Video Recorder User Manual
147