HIKVISION DeepinMind Series - Configure Customized Protocol

Figure 1-13 Edit Network Camera
3. Select Adding Method as Manual.
Plug-and-Play
The camera is physically connected to the PoE interface. Its parameters cannot be edited.
You can go to System → Network → TCP/IP to change IP address of PoE port.
Manual
Add IP camera without physical
connecon via network.
4. Enter IP address, User Name, and Password.
5. Click OK.
1.4.4
Congure Customized Protocol
To connect network cameras which are not congured with the standard protocols, you can
congure the customized protocols for them. The system provides 16 customized protocols.
Steps
1. Go to More Sengs → Protocol .
Network Video Recorder User Manual
12