HIKVISION DeepinMind Series - Chapter 1 Basic Operation; Activate Your Device

Chapter 1 Basic Operaon
1.1 Acvate Your Device
1.1.1 Default User and IP Address
•
Default administrator account: admin.
• Default IPv4 address: 192.168.1.64.
1.1.2
Acvate via Local Menu
For the rst-me access, you need to acvate the device by seng an admin password. No
operaon is allowed before acvaon. You can also acvate the device via Web Browser, SADP or
Client
Soware.
Steps
1. Enter the admin password twice.
Figure 1-1 Acvate via Local Menu
Warning
We highly recommend you to create a strong password of your own choosing (using a minimum
of 8 characters, including at least three kinds of following categories: upper case leers, lower
case leers, numbers, and special characters) in order to increase the security of your product.
Network Video Recorder User Manual
1