HIKVISION DeepinMind Series User Manual

8.
Oponal: Set Stranger Prompt. It will display the prompt in live view Target Detecon (Facial
Detecon) when comparison failed.
Stranger Prompt
It will display the prompt in live view Target Detecon (with Facial Detecon checked) when
face picture comparison failed.
Enable Alarm Output Pulse
It is usually linked with a gate. When a person is passing a gate, if the comparison succeeded,
it will trigger a pulse to open the gate. The pulse is between 100 to 900 ms. You can set
Alarm Output Pulse (ms) in System → Event → Normal Event → Alarm Output .
9. Select face picture libraries and set similarity.
10. Set the arming schedule. Refer to
Congure Arming Schedule .
11. Set the linkage acons. Refer to Congure Linkage Acons .
12. Oponal: Congure face grading parameters. Refer to Face Grading Conguraon .
13. Click Apply to save the
sengs.
6.3.5 People Frequency Alarm
You can only congure people frequency alarm via web browser.
Frequently Appeared Person Alarm
It will trigger alarm when a person has appeared at a high frequency.
Steps
1. Go to Conguraon → Event → People Frequency → Frequently Appeared Person .
Network Video Recorder User Manual
82

HIKVISION DeepinMind Series Specifications

General

Brand	HIKVISION
Model	DeepinMind Series
Category	Network Hardware
Language	English