HIKVISION DeepinMind Series - People Gathering Detection

3. Click Loitering
Detecon.
Figure 5-3 Loitering Detecon
4. Check Enable Loitering Detecon..
5. Oponal: Check Save VCA Picture to save the captured loitering detecon pictures.
6. Set loitering
detecon parameters.
1) Select Arming Region. Up to 4 regions are selectable.
2) Set Time Threshold.
Time Threshold
The
me of car staying in the region. If the value is 10, an alarm is triggered aer the car
has stayed in the region for 10s. Its range is [1s-10s].
3) Set
Sensivity.
Sensivity
Similarity of the background image to the object. The higher the value, the easier the
detecon alarm will be triggered.
7. Set the arming schedule. Refer to Congure Arming Schedule .
8. Set the linkage
acons. Refer to Congure Linkage Acons .
9. Click Apply.
5.2.2 People Gathering
Detecon
People gathering detecon is used to detect whether the density of human bodies within a
specied area exceeds the set value and trigger alarm for linked acons.
Steps
1. Go to Smart Analysis → Smart Event Sengs → Other Events .
2. Select a camera.
3. Click People Gathering.
Network Video Recorder User Manual
59