HIKVISION DeepinMind Series - Edit the Admin User

12.1.2 Edit the Admin User
For the admin user account, you can modify your password and unlock paern.
Steps
1. Go to System → User .
2. Select the admin user from the list.
3. Click Modify.
Figure 12-1 Edit User (Admin)
4. Edit the admin user informaon as desired, including a new admin password (strong password
is required) and MAC address.
5. Edit the unlock
paern for the admin user account.
1) Check Enable Unlock Paern to enable the use of an unlock paern when logging in to the
device.
2) Use the mouse to draw a
paern among the 9 dots on the screen, and release the mouse
when the
paern is done.
6. Check Export of GUID File to export the GUID le for the admin user account.
Note
When the admin password is changed, export the new GUID to the connected USB ash drive in
the Import/Export interface for the future password reseng.
7. Congure security queson for password reseng.
8. Congure reserved email for password reseng.
Network Video Recorder User Manual
132