HIKVISION DeepinMind Series - Configure Linkage Actions

Figure 5-13 Set Arming Schedule
4. You can click Copy to copy the current day arming schedule sengs to other day(s).
5. Click Apply to save the sengs.
5.4
Congure Linkage Acons
Alarm linkage acons will be acvated when an alarm or excepon occurs, including Event Hint
Display, Full Screen Monitoring, Audible Warning (buzzer),
Nofy Surveillance Center, Trigger Alarm
Output, and Send Email.
5.4.1
Congure Auto-Switch Full Screen Monitoring
When an alarm is triggered, the local monitor displays in full screen the video image from the
alarming channel congured for full screen monitoring. And when the alarm is triggered
simultaneously in several channels, you must
congure the auto-switch dwell me.
Note
Auto-switch will terminate once the alarm stops and back to the live view interface.
Steps
1. Go to System → Live View → General .
2. Set the event output and dwell me.
Network Video Recorder User Manual
70