Add Search Result as Sample Picture
You can add searched human body pictures as sample pictures. And then search human body
pictures by the sample pictures.
Steps
1. Search human body pictures.
2. In search result interface, click to select a picture and click Add to Sample.
3. Return to search
condion sengs interface, the selected sample will be listed.
6.6 Mul-Target-Type Detecon
Mul-target-type detecon enables the device to detect the faces, human bodies and vehicles
simultaneously in a scene.
Before You Start
Go to Smart Analysis → Engine Sengs → Engine Conguraon to congure at least one engine
usage as Video Structuralizaon-Real-Time. Refer to Engine Conguraon for details.
Steps
1. Go to Smart Analysis → Smart Event Sengs → Video Structuralizaon .
2. Select a camera.
3. Check Enable
Mul-Target-Type Detecon.
4.
Oponal: Check Save VCA Picture to save the captured intrusion detecon pictures.
5. Oponal: Check Enable NVR Smart Analysis. The device will analyze the video, cameras only
transmit video stream.
6. Set
detecon area.
1) Click Draw Area.
2) Adjust the red frame on the image to draw the
detecon area. It is full screen by default.
3) Click Stop Drawing.
7.
Oponal: Set Capture Quality. The captured picture will be stored to the device, high quality
brings higher resoluon, but it takes larger storage space. Picture quality will not aect
detecon
accuracy.
8. Set the arming schedule. Refer to Congure Arming Schedule .
9. Set the linkage method. Refer to
Congure Linkage Acons .
10. Click Apply.
6.7 Vehicle
Detecon
Vehicle detecon is available for the road trac monitoring. In vehicle detecon, the passed
vehicle can be detected and the picture of its license plate can be captured. You can send alarm
signal to
nofy the surveillance center and upload the captured picture to FTP server.
Network Video Recorder User Manual
96
To Next Page
Loading...
Need help?
General
