HIKVISION DeepinMind Series User Manual

Figure 1-8 TCP/IP Sengs
2. Select Working Mode as Net-Fault Tolerance or Mul-Address Mode.
Net-Fault Tolerance
The two NIC cards use the same IP address, and you can select the main NIC to LAN1 or
LAN2. In this way, in case of one NIC card failure, the device will automacally enable the
other standby NIC card so as to ensure the normal running of the system.
Mul-Address Mode
The parameters of the two NIC cards can be congured independently. You can select LAN1
or LAN2 under Select NIC for parameter
sengs. Select one NIC card as the default route.
When the system connects with the extranet, the data will be forwarded through the default
route.
3.
Congure other IP sengs as needed.
4. Click Apply.
Note
• Check Enable DHCP to obtain IP
sengs automacally if a DHCP server is available on the
network.
• Valid MTU value range is 500 to 9676.
1.3 HDD Sengs
Ensure the video recorder storage media is well. You can install at least one HDD and inialize it, or
create a RAID and inialize it.
1.4 Add Network Camera
Before you can get live video or record the video les, you must add the network cameras to the
connecon list of the device.
Network Video Recorder User Manual
7

HIKVISION DeepinMind Series Specifications

General

Brand	HIKVISION
Model	DeepinMind Series
Category	Network Hardware
Language	English