HIKVISION DeepinMind Series User Manual

3) Click Draw Region, and draw a quadrilateral in the preview window.
8.
Oponal: Draw the maximum size/minimum size for targets. Only the targets in the size ranging
from maximum size to minimum size will trigger line crossing detecon.
1) Click Max. Size/Min. Size.
2) Draw an area in preview window.
3) Click Stop Drawing.
9.
Oponal: Select Target of Interest as Human Body or Vehicle to discard alarms which are not
triggered by human body or vehicle.
10. Set the arming schedule. Refer to
Congure Arming Schedule .
11. Set linkage
acons. Refer to Congure Linkage Acons .
12. Click Apply.
6.4.4 Region
Exing Detecon
Region exing detecon detects objects that exit from a predened virtual region.
Steps
1. Go to Smart Analysis → Smart Event Sengs → Perimeter Protecon .
2. Select a camera.
3. Click Region
Exing.
Figure 6-14 Region Exing Detecon
4. Check Enable Region Exing Detecon.
5.
Oponal: Check Save VCA Picture to save the captured region exing detecon pictures.
6. Oponal: Check Enable AI by Device. The device will analyze the video, cameras only transmit
video stream.
7. Follow these steps to set the
detecon rules and detecon areas.
1) Select Arming Region. Up to 4 regions are selectable.
2) Set
Sensivity. The higher the value is, the more easily the detecon alarm will be triggered.
Its range is [0-100].
Network Video Recorder User Manual
92

HIKVISION DeepinMind Series Specifications

General

Brand	HIKVISION
Model	DeepinMind Series
Category	Network Hardware
Language	English