F 7133 (0507)
350
If all fuses are in order, the relay contact d22-z24 is closed. If a fuse is not equipped or faulty,
the relay will be de-energized. Faults are announced via the LEDs as follows:
Supply voltage
for path
Fuse
in order faulty/missing
exists LED on LED flashing
fails LED off LED flashing
Table 1: LED displays
Note If the module is not wired all LEDs are off.
If the input voltage is missing in case of current paths connected
together, no statement about the different fuses can be made.
To Next Page
Loading...
Need help?
General