EasyManuals Logo

HIMA H41q User Manual

Default Icon
522 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #357 background imageLoading...
Page #357 background image
F 7553 (0630)
All rights reserved. Equipment subject to change without notice: 351
HIMA Paul Hildebrandt GmbH + Co KG, P.O. Box 1261, 68777 Brühl
F 7553
F 7553: Coupling module
in the assembly kit B 9302,
with switch-off of the watchdog signal,
for PES H51q
Figure 1: F 7553 Coupling module
The coupling module contains the monitoring of the 5 V supply of the I/O subrack and transmits
a corresponding status signal to the central module. The module is automatically tested during
operation.
The LED WD on the front plate shows the existing safety-related watchdog signal. By the sec-
ond LED SEL the access to the I/O modules of the appertaining I/O subrack is signaled.
Via the recessed WD switch the watchdog signal can be switched off for the appertaining I/O
subrack to change the coupling module F 7553 without triggering an error stop for the -MS and
-HS systems.
Space requirement 4 SU
Operating data 5 VDC / 600 mA,
24 VDC / 750 mA
Note If the WD switch is not operated before the coupling module is
replaced, the entire system switches into error stop!
S1
1234
WD
ON

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HIMA H41q and is the answer not in the manual?

HIMA H41q Specifications

General IconGeneral
BrandHIMA
ModelH41q
CategoryIndustrial Equipment
LanguageEnglish