B 9361 (0507)
All rights reserved. Equipment subject to change without notice: 143
HIMA Paul Hildebrandt GmbH + Co KG, P.O. Box 1261, 68777 Brühl
B 9361
B 9361: Assembly kit
Additional power supply 5 V for Systems H51q
Figure 1: Front view
1 Parts of the B 9361 assembly kit
• 1 x K 1408 central rack, 5 units high, 19 inches, with integrated cable tray.
• additional modules on the rear
• 3 x Z 6011 decoupling and fusing to feed the power supply modules
• 1 x Z 6012 fan with fan run monitoring and fuse monitoring
• 2 x Z 6013 decoupling and fusing of the supply voltage for Z 6012
include the modules:
• 1 x F 7126 power supply module 24 V / 5 V, 10 A (PS1)
• 1 x F 7131 power supply monitoring module
• 14 socket connectors to install standard (F type) modules of the HIMA Planar System
Modules for option (separate order):
• 2 x F 7126 power supply module 24 V/5 V (PS2, PS3)
The 5 V outputs of the power supply modules are switched in parallel.
• 1...14 x Standard (F type) modules of the HIMA Planar System
The additional power supply (loadable up to 18 A) will be used if the power supply modules
built-in in the central rack are not sufficient to supply the 5 V circuits (i.e. I > 18 A for 3 power
supply modules F 7126 in a redundant control). For the accurate current consumption for each
module refer to the appertaining data sheets.
The 5 V circuits of the power supply modules in the central rack and in the additional power
supply should not be switched in parallel but the GND of both power supplies has to be con-
nected together. Availability is present because 2 of 3 power supply modules are able to gua-
rantee the 5 V supply.
F7126
F7126
F7126
F7126
F7126
F7131
F7126
F7131
B9361
NG1/PS1 NG2/PS2 NG3/PS3
1 2 3 4 5 6 7 8 9 10 1112131415161718192021
PS1 PS2 PS3
K 1408
Option:
14 slots for F modules of the HIMA Planar System
To Next Page
Loading...
Need help?
General