62 Communications Error
A participant in a complex alarm
function hosted by this card has stopped
communicating.
Check all cards within the participant
group are fully inserted into the rack and
are functioning correctly.
Error Error Code Meaning Software Card Fault Latch
Code Version Status Signal
All Active Yes No
5.6 Miscellaneous Errors
07 Divide By Zero
Internal calculation error.
Reset card by removing power to the
card. If problem persists, replace the
card.
01 Invalid Command
A serial command has been received
that is not valid for this card.
Error Error Code Meaning Software Card Fault Latch
Code Version Status Signal
All Active No No
All Active No No
To Next Page
Loading...
