Honeywell 5704

3-13
MAN0448_Issue 13_2010 5704 Control System
005704-M-5001 A03249
CHAPTER 3 CONTROLS AND FACILITIES
 AslowashingredCHLLEDindicatesthataSTELorLTELalarm
level has been exceeded.
2.3.2 ATTN (Attention) LED
The amber ATTN LED provides a common indication for the card as
follows:
a. HARDWARE OR SOFTWARE FAULT
Slow Flashing Amber ATTN LED
 A slow ashing amberATTN LED indicates that there is a card
hardware or software fault.
b. UPDATE ALARM CONDITION
Fast Flashing Amber ATTN LED
AfastashingamberATTNLEDindicatesthatthereisanupdate
alarmcondition.Updatealarmscanbeconguredforacard,ora
number of cards, and for each A1, A2, A3, Fault and/or Inhibit.
/////////////////////////////////////
/////////////////////////////////////
/////////////////////////////////////
/////////////////////////////////////
/////////////////////////////////////
/////////////////////////////////////
/////////////////////////////////////
/////////////////////////////////////
1 second
1 second
1 second
1 second
f. Special Alarm (STEL and LTEL)
Slow Flashing Red CHL LED.
/////////////////////////////////////
/////////////////////////////////////
/////////////////////////////////////
/////////////////////////////////////
/////////////////////////////////////
/////////////////////////////////////
/////////////////////////////////////
/////////////////////////////////////
1 second
1 second
1 second
1 second
1 second
1 second
////////
////////
////////
////////
////////
////////
////////
////////
////////
////////
////////
////////
////////
////////
////////
////////
////////
////////
////////
////////
////////
////////
////////
////////
////////
////////
////////
////////
////////
////////