Honeywell Farenhyt Series - 8.2.2 Output Circuit Mapping; 8.2.3 Event Mapping

90 IFP-300 Series Manual — P/N LS10145-001SK-E:C 4/6/2022
Programming Overview Programming Menu Quick Reference
Point
(cont.)
Internal Power and
External Power
Enter Pt /Select Function Select
Sensor
UNUSED Section 8.5
B NOTIF NOTIF OUTPUT Select
Group
Supervised
Yes or No
CONTROL
CIRCUIT
A NOTIF NOTIF OUTPUT Select
Group
Supervised
Yes or No
CONTROL
CIRCUIT
AUX PWR CONSTANT
AUX RESET
AUX DOOR
AUX SYNC
9
B SWITCH MANUAL PULL Latch and Non-Latch feature only
appear for WATERFLOW,FIRE
SUPERVISORY, FIRE TAMPER,
ZONE AUX1, ZONE AUX2,
SYSTEM AUX1, SYSTEM
AUX2., ECS INPUT, ECS
TAMPER, and ECS
SUPERVISORY.
WATER FLOW
FIRE SUPER-
VISORY
FIRE TAMPER
FIRE DRILL
SILENCE
RESET
P.A.S. ACK
ZONE AUX 1
ZONE AUX2 Latch and Non-Latch feature only
appear for WATERFLOW,FIRE
SUPERVISORY, FIRE TAMPER,
ZONE AUX1, ZONE AUX2,
SYSTEM AUX1, SYSTEM
AUX2., ECS INPUT, ECS
TAMPER, and ECS
SUPERVISORY.
SYSTEM AUX1
SYSTEM AUX2
MANUAL
RELEASE
INTERLOCK
STATUS POINT
ECS INPUT If ECS INPUT is selected choose
associated EVENT
ECS TAMPER Latch and Non-Latch feature only
appear for WATERFLOW,FIRE
SUPERVISORY, FIRE TAMPER,
ZONE AUX1, ZONE AUX2,
SYSTEM AUX1, SYSTEM
AUX2., ECS INPUT, ECS
TAMPER, and ECS
SUPERVISORY
ECS SUPER-
VISORY
A SWITCH Same as B SWITCH Section 8.5.3
B
DETECT
2-WIRE SMOKE
4-WIRE SMOKE
CO 4 WIRE DET
A
DETECT
2-WIRE SMOKE
4-WIRE SMOKE
CO 4 WIRE DET
Select Group or Zone Number Group or Zone selection will
appear depending on the
function selected
Edit Name Enter Name
5880/5865/ECS-
Series Amplifiers
Enter Point # UNUSED Section 8.5.4 and Section 8.5.6
NOTIF NOTIFICATION OUTPUT
CONTROL CIRCUIT
Menu Options/Defaults Comments
Table 7.4 Programming Menus Quick Reference List (Continued)