Introduction
Revision 6 HC900 Process & Safety Controller User and Installation Manual 7
21 April 2017
Throughout this guide, where the text “New systems” is used, the following model numbers are applicable.
Note: Model number change: 900*xx where if *= C designates Controller module and *=S designates Scanner
module.
New System (SIL and Non SIL Model Numbers)*
900C30-0360-00
900C50-0360-00
900C70-0360-00
900C75-0360-00
900S75-0360-00
900S50-0360-00
900C30S - 0360-00
900C50S - 0360-00
900C70S - 0360-00
900C75S-0360-00
900S50S - 0360-00
900S75S-0360-00
*Reference only – For the latest Hardware and firmware revision numbers can be found at:
https://www.honeywellprocess.com/library/support/Public/Downloads/HC900-
SafetyControllerModulesRevisions.zip
To Next Page
Loading...
