Honeywell HC900 - Assemble Controller Rack; Table 9 - Assemble C30;C50;C70 Controller Rack

58 HC900 Process & Safety Controller User and Installation Manual Revision 6
21 April 2017
For P01 power supply use 3.0A, slow-blow for 115VAC operation; 2.5A, slow-blow for 230VAC
operation. For P02 power supply, use 2.5A, slow-blow for 115VAC operation; 2.0A, slow-blow for
230VAC operation. For P24 power supply use 7.0A slow-blow.
Figure 31 – Redundant power supplies each with external fuse and switch