Revision 6 HC900 Process & Safety Controller User and Installation Manual 39
21 April 2017
The user can use the standard Modbus command set to generate a custom set of drivers for his specific
application, or may purchase additional software (for example, OPC with Modbus /TCP protocol) to
reduce or virtually eliminate development tasks.
HMI software
HMI software available for use with the HC900 Controller includes, but is not necessarily limited to the
following packages.
available from Honeywell
Experion HS Software, which operates under Windows
TM
operating software, provides PC-based
supervisory control and data acquisition. This package includes a large selection of standard
operating display templates, which can reduce development time significantly. Experion HS
includes a full graphic display development environment, enabling development of custom
graphics that include animated responses to changing process conditions.
A batch reporting option is available, which includes a standard template for creating batch
reports.
SpecView32 (SpecView Corporation)
Matrikon OPC Server (works with redundant and non-redundant networks)
Other software (available from third-party sources)
The following software, which incorporates Modbus/TCP connectivity, is available from third-party
sources:
The Fix Family (Intellution Incorporated)
Wonderware (Wonderware Corporation)
Citect (CI Technologies)
OPC server/client software (various; available from Kepware and others)
Note: The items in this list are not sold by Honeywell. They have not all been tested and certified by
Honeywell, and are not necessarily recommended or endorsed by Honeywell for any specific use.
To Next Page
Loading...
