PC45 Series Printer User Guide 97
Net1
To view these settings:
• From the printer Main Menu, select Settings> Network Services > Net1.
• From the printer web page, click Configure > Network Services > Net1.
Email Server
To view these settings:
• From the printer Main Menu, select Settings> Network Services > Email Server.
• From the printer web page, click Configure > Network Services > Email Server.
Net1 Network
Service
Description Default
Queue Selects how the printer handles multiple Net1 connections. On
Port Number Sets the port number that defines the Net1 TCP port. Range
is 1024 to 65535.
9100
New Line Character Defines the characters that the printer echoes to the host to
indicate that it has moved to a new line
CR/LF
Timeout Sets the timeout value in seconds that printer uses to check
the existing connection when the connection is terminated
from other end. Range is 60 to 700 seconds.
700
Secure
Communication
Determines if TLS encryption is used for data
communication.
Enable
Email Server Description Default
Mode Selects the mode the printer uses to communicate with the
email server.
Manual
Port Number Sets the port number the printer uses to communicate with
email server. Range is 1 to 65535.
25
Server Address Sets the IP address of the email server 0.0.0.0
From Address Sets the email address of the person who will receive the alert
messages.
-
To Address Sets the email address that appears as the sender of the alert
messages.
-
Email Password Sets the password the printer uses to communicate with
SMTP SSL service.
-
To Next Page
Loading...
Need help?
General
