10 PC45 Series Printer User Guide
Access the Printer Web Page
1. Open a browser window on your PC.
2. In the location or address bar, type https:// followed by the printer IP address
and press Enter.
Note: The default printer web page is set to HTTPS protocol.
3. Click Login. The Login page appears.
You will be prompted for a user name and password. The defaults are:
•User Name: itadmin
•Password: pass
After logging in, you will be prompted to change your password.
Note: You can also enter User in the Username field without the need of a password to login.
This will allow you to access limited features in the printer web page.
Set the Printer Command Language
You can use one of these methods to change the printer command language:
•Printer web page
• Main Menu
• PrintSet 5
• Print Set MC
Set the Command Language from the Printer Web Page
To set the command language from the printer web page, you need to turn on the
printer and connect to your network.
1. Follow the directions to Access the Printer Web Page.
2. Once you are logged in to the printer web page, click Configure.
3. Click System Settings > General.
4. Select the printer command language you want to used from the Command
Language list, and then click Save. A restart button will appear at the top of the
page.
5. Click Restart.
To Next Page
Loading...
Need help?
General
