PC45 Series Printer User Guide 33
Configure RFID settings using Web Page
To configure the RFID media settings, the printer must be connected to an
Ethernet or wireless network and you must know the printer IP address.
1. Open a web browser on your PC.
2. In the address bar, type https:// followed by the printer IP address and press
Enter. The printer web page appears.
3. Click Login.
4. Type your Username and Password and then click Login. The default value for
Username is itadmin and the default value for Password is pass.
5. Click Configure > Printing > RFID. The RFID settings page appears.
6. Change RFID settings as needed. You can also click Default Settings to
restore all default RFID settings.
7. Click Save.
To Next Page
Loading...
Need help?
General
