PC45 Series Printer User Guide 35
CONNECT THE PRINTER
This section contains information about connecting the printer to a PC or to a net-
work. Use the Printer Web Page or the Main Menu to configure settings.
Connect the Printer to Your PC
You can connect the printer to your PC using one of the following methods.
Connect the Printer Using a Serial Cable
You can use a serial connection to communicate with your PC and send commands
directly to the printer through a terminal connection.
1. Connect one end of the DB9 to DB9 RS-232 cable to the back of your printer
and connect the other end to a serial COM port on your PC.
Connect the Printer Using a USB Cable
Connect only one printer to your PC, either directly or through a hub. You do not
need to set up any parameters for USB communications.
1. Connect one end of the USB Type A cable to the back of the printer and
connect the other end to your PC.
2. Your PC will recognize the printer driver and connect to the printer.
To Next Page
Loading...
Need help?
General
