PC45 Series Printer User Guide 23
1. Place the media behind the printer.
2. Feed the media into the printer through the external media feed slot.
3. Place an empty paper core on the media holder. Thread the media on top of the
empty core and through the media guides as you would for the media installed
inside the printer.
About the Ribbon
Thermal transfer printing provides a durable printout that is less vulnerable to
chemicals, heat, and sunlight than direct thermal printing. Select a ribbon type
that matches the media you are using and configure the printer for thermal
transfer media.
The printer supports thermal transfer ribbon rolls with the ink-coated side facing
either inward or outward. To determine which type of ribbon you have, place the
ribbon on a piece of paper as shown, and use a pen or other sharp object to scratch
the ribbon. If you see a mark on the paper, your ribbon is wound ink out.
= Ink in
To Next Page
Loading...
Need help?
General
