PC45 Series Printer User Guide 13
SET UP THE PRINTER
This section contains information about loading media and ribbon, printing a test
label, calibrating the screen, and adjusting the printer.
Power Up the Printer
The printer goes through a startup wizard the first time you turn on the power.
1. Connect one end of the power cord to the back of the printer and plug the other
end to AC power.
Note: Make sure the power switch of the printer is turned off before connecting the power
cord.
2. Press the power switch to turn on the printer.
3. As the printer starts up, a progress bar appears, then the startup wizard
appears.
Warning: Installing the printer requires a power cord connected to a
socket-outlet with an earthing connection.
To Next Page
Loading...
Need help?
General
