48 PC45 Series Printer User Guide
Change Background Image for the Ready Screen
You may customize the Ready screen that appears on the printer. The background
image you create must be:
• 320 x 240 pixels.
•named background_idle.png.
1. Create a /display directory on your USB storage device.
2. Copy your background_idle.png file to the /display directory on the USB
storage device.
3. Insert the USB storage device into one of the USB host ports on the printer.
4. Use the USB Device menu to upload the file to the printer.
5. Restart the printer.
The new image file you uploaded appears in place of the original Ready screen.
Printer Profiles
You can save updated printer default settings as a printer profile. The printer
supports multiple profiles that can be saved and loaded at any time. For example,
you can create one profile to use when you are printing on continuous label stock,
and a different profile to use when you are printing on label stock with gaps.
The following printer settings are not saved in a profile:
• IP address for either IPv4 or IPv6 networks.
• Media calibration settings for the label stop sensor.
• Remote port or remote host values for a remote computer accessing the printer
through raw TCP.
Save a Printer Profile from the Web Page
From the printer web page, you can save the current settings as a profile that you
can load from the printer memory at any time.
1. In the printer web page (see Access the Printer Web Page), click Configure.
2. Click System Settings > General.
3. Click Save As Profile. The Save As Profile screen appears.
4. Enter a name in the Profile field, and then click Save.
To Next Page
Loading...
Need help?
General
