84 PC45 Series Printer User Guide
Inner
Authentication
Selects the authentication method that is used when the
EAP type is EAP-FAST, PEAP, or TTLS
MSCHAPv2
CA Certificate Sets the name of the Certificate Authority (CA) that
verifies the server certificate. This CA should be the same
one that was used to sign the server certificate.
honeywell.pem
Client Certificate Sets the name of the client certificate the printer uses to
authenticate to the network using EAP-TLS. Maximum
length is 128 characters.
-
Client Key Sets the private key the printer uses for EAP-TLS.
Maximum length is 128 characters. Use the certinstallsh
script to install the certificate correctly.
-
Validate Certificate Determines if the identity of the authentication server is
verified using its certificate when using EAP-TTLS, PEAP,
or EAP-TLS. Honeywell recommends that you set
Validate Certificate to Yes.
No
PAC Sets the name of the PAC (Protected Access Credential)
file that is used for EAP-FAST authentication. The printer
uses this file if Acquire PAC is ON and the current
installed PAC fails to authenticate the printer to the
network.
eap-fast.pc
Acquire PAC Determines if automatic PAC file provisioning is on for
EAP-FAST authentication.
On
(IPv4) IP
Assignment
Method
Specifies how the printer obtains an IP address. DHCP
(IPv4) IP Address Specifies the unique network-level address that is
assigned to each device in a TCP/IP network (IPv4).
0.0.0.0
Subnet Mask Specifies a number that defines the range of IP
addresses that can be used in a TCP/IP network (IPv4).
0.0.0.0
Default Router Specifies the IP address of a router that is used when a
device sends a packet to another subnet or to an
unknown destination.
0.0.0.0
DHCP Response Specifies if the printer receives DHCP responses by
broadcast or unicast.
Broadcast
(IPv6) IP
Assignment
Method
Specifies how the printer obtains an IP address (for IPv6
networks).
Automatic
(IPv6) IP Address Specifies the unique network-level address that is
assigned to each device in a TCP/IP network (IPv6).
-
802.11 Wireless
Setting
Description Default
To Next Page
Loading...
