Chapter 5 – General Operation
Honeywell Confidential: Use or disclosure of information on this page is subject to the restrictions on the title page.
13841 Rev A
99
5.4.1 Propeller Balance Setup
To begin a propeller balance operation, press the context key
next to the Main Menu screen option PROPELLER BALANCE.
The Vibrex 2000 and Vibrex 2000 Plus display the first of two
Propeller Balance Setup screens. This set of screens allows the
user to enter basic balance setup information.
5.4.1.1
Entering Aircraft IDs
The Vibrex unit asks for an aircraft tail number or serial number
(aircraft ID). The user may use both alpha and numeric keys for
this data entry, as well as the available punctuation keys. The
user may use up to six characters for this entry.
Enter this information in the Vibrex 2000, using the first
Propeller Balance Setup screen, as shown below.
Enter (or edit) the aircraft ID, as follows:
1. Press the AIRCRAFT ID context key, next to the AIRCRAFT ID
label.
? PROPELLER BAL SETUP
► AIRCRAFT ID[ ]
ENG[ 1 ]
► PROP ch<1A>
► REAR ch<NONE>
if ok, push START
SELECT TO ENTER
AIRCRAFT, ENGINE
ID NUMBER
SELECT TO ENTER
PROPELLER
CHANNEL NUMBER
SELECT TO ENTER
REAR CHANNEL
NUMBER
To Next Page
Loading...
