Honeywell Vibrex 2000 User Manual

Chapter 5 – General Operation
Honeywell Confidential: Use or disclosure of information on this page is subject to the restrictions on the title page.
13841 Rev A
192
Frequency Ranges - The available Spectrum Analysis feature
frequency ranges (in RPM) for the Vibrex 2000 are
 0 to 1500
 0 to 3000
 0 to 12,000
 0 to 24,000
The available Spectrum Analysis feature frequency ranges (in
RPM) for the Vibrex 2000 Plus and Enhanced Vibrex 2000
Plus are
 0 to 1200
 0 to 3000
 0 to 6000
 0 to 12,000
 0 to 30,000
 0 to 60,000
 0 to 120,000
 0 to 300,000
 0 to 600,000
NOTE: When the maximum range is selected, the orders
list will show no IPS at the low ranges (first four bins of
the FFT) of the balancer will not show any IPS.
NOTE: To select the optimum frequency range, multiply
the primary frequency by 12 and choose the nearest
frequency range that corresponds to that value.
5.8.1.1 Ranging Feature
The user may use the ranging feature to provide a more detailed
study of vibration, by narrowing the range. Take the following
characteristics into account when using this feature:
 Select the range of interest (active orders) by pressing the

Honeywell Vibrex 2000 Specifications

General

Brand	Honeywell
Model	Vibrex 2000
Category	Test Equipment
Language	English