Chapter 5 – General Operation
Honeywell Confidential: Use or disclosure of information on this page is subject to the restrictions on the title page.
13841 Rev A
190
NOTE: Up to 8 moveline check runs are allowed to be
saved. Once this buffer is full it must be cleared using
the CLEAR option by pressing inside of the top menu
Review function.
5.8 Spectrum Analysis (All Vibrex
2000 units)
After any type of balance operation, if the user feels additional
vibrations, the user can use the Spectrum Analysis feature of the
Vibrex 2000, Vibrex 2000 Plus or Enhanced Vibrex 2000 Plus to
determine the probable source of the vibration. This feature
allows the user to collect extensive, detailed spectral data.
5.8.1 Spectrum Analysis Setup
Access and set up this feature, as follows:
1. From the Main Menu screen, press the SPECTRUM
ANALYSIS context key.
This action displays the Spectrum Setup screen (see example
below).
To Next Page
Loading...
Need help?
General
