Honeywell Vibrex 2000 User Manual

Chapter 5 – General Operation
Honeywell Confidential: Use or disclosure of information on this page is subject to the restrictions on the title page.
13841 Rev A
126
Enhanced Vibrex 2000 Plus (Heli and Fixed Wing)
Read this screen, as follows:
 TYPE selects the type of log to review: Spectrums, Prop
Runs, Bal Meas, Helicptr Runs (EV2K+ Heli Only), Fixed
Wing Runs (EV2K+ FW Only), Moveline Runs (EV2K+
FW Only).
 REVIEW: The number before the slash mark (/) for each
category of measurement represents the number of histories
stored for the current run. The number displayed after the
slash mark represents the total number of readings stored for
each category of measurement.
NOTE: The number of logs available for review depends
on the type of log file.
 CLEAR permanently erases all the logs of the selected type
from memory. A prompt screen will confirm this operation.
NOTE: The Clear function under the main Review menu is
the only place available to globally clear the run histories.
5.4.5.1 Reviewing Propeller Balance
Measurements
Review propeller balance measurements, as follows:
1. From the Review Menu screen, press PROP RUNS. The
following information displays:
====== REVIEW =======
►TYPE <log type list>
► REVIEW 1/10
► CLEAR

Honeywell Vibrex 2000 Specifications

General

Brand	Honeywell
Model	Vibrex 2000
Category	Test Equipment
Language	English