Honeywell Vibrex 2000 - 2.3 System Specifications

Chapter 2 – System Overview
Honeywell Confidential: Use or disclosure of information on this page is subject to the restrictions on the title page.
13841 Rev A
14
capability. This version supports balance charts for over
30 specific fixed wing models.
2.3 System Specifications
The tables in this section provide complete lists of the Vibrex
2000, Vibrex 2000 Plus and Enhanced Vibrex 2000 Plus
systems’ technical specifications.
2.3.1 Vibrex 2000 Specifications
The table, starting below, lists complete technical specifications
for the Vibrex 2000 system.
Characteristic
Specifications
Basic Specifications
Data storage capacity
1 Mb
Built-in test (BIT)
coverage
Memory check and calibration on power
up; user-initiated tests (with STATUS key)
check battery and sensor power
NOTE: Errors are logged to a
printable fault log.
Date and time stamping
Yes
Log (data) files -
contents and formats
Balance jobs, log book, balance, spectrum,
fault log, all in ASCII format
Compatible software
(ground based)
Honeywell V2K Download and V2K Plot
programs
Basic Performance
Frequency range
0 to 400 Hz
Accuracy
±5%, from 5 Hz to 333 Hz