Chapter 5 – General Operation
Honeywell Confidential: Use or disclosure of information on this page is subject to the restrictions on the title page.
13841 Rev A
124
Use one of the following responses:
Press CONTINUE BALANCE ON [ENGINE] if the user
wishes to continue balance operations in the current session.
Press START A NEW BALANCE JOB if the user is
finished with the current balance session and wants to begin
a new one.
5.4.5 Reviewing Balance Histories
Review balance histories and other past data, as follows:
1. Return to the Main Menu screen.
NOTE: Even though REVIEW is a dedicated key, it does
not work unless the Main Menu screen is displayed.
2. From this screen, press REVIEW.
The Review Menu screen displays (see the example below).
== BALANCE RUN 1 ===
AIRCRAFT ID [ ]
08APR00 12:23:33 #1A
► CONTINUE BALANCE ON
ENG-1
► START A NEW BALANCE JOB
To Next Page
Loading...
