Honeywell Vibrex 2000 - Vibrex 2000 Plus Specifications

Chapter 2 – System Overview
Honeywell Confidential: Use or disclosure of information on this page is subject to the restrictions on the title page.
13841 Rev A
17
Characteristic
Specifications (Continued)
Mating connector type
(PC to printer)
D-sub, 9-pin
Power requirement
3 to 6.4 Vdc, 250 mA
Battery life (typical)
40 hr
Case material
Aluminum alloy
Environmental Conditions
Temperature
0°C to 50°C
Electromagnetic
interference (EMI)
susceptibility and
radiated emissions
standards
Industrial Electronic Control Equipment
Class certified to
• Class Standard EN50081-2
• Standard EN50082-2
2.3.2 Vibrex 2000 Plus
Specifications
The table, starting below, lists complete technical specifications
for the Vibrex 2000 Plus system.
Characteristic
Specifications
Basic Specifications
Data storage capacity
1 Mb
Built-in test (BIT)
coverage
Memory check and calibration on power
up; user-initiated tests (with STATUS key)
check battery and sensor power
NOTE: Errors are logged to a
printable fault log.