Chapter 5 – General Operation
Honeywell Confidential: Use or disclosure of information on this page is subject to the restrictions on the title page.
13841 Rev A
129
5.4.5.4
Reviewing Spectrum Order Analysis
Review spectrum order analysis (if done), as follows:
1. Press the VIEW PEAKS context key.
2. To view the orders press the context key next to the <RPM
PEAK IPS> label.
NOTE: The Vibrex 2000 Plus also allows you to review a
spectrum graph plot. See Section 5.6.4 “Spectrum Viewer
Feature” for details.
5.4.5.5
Clearing Runs, Measurements, and
Lists
Clear runs, measurements, and lists, as follows:
1. From the Main Menu screen, press REVIEW. The Review
Menu screen displays.
2. Press the STATUS context key.
3. Press the context key(s) next to any item the user wishes to
clear.
NOTE: The user cannot clear individual
readings in the categories that are
stored.
5.5 Helicopter Rotor Track and
Balancing (Generic)
Use the TRACK & BALANCE option from the Main Menu
screen for helicopter rotor track-and-balance operations. For
more information on the Main Menu screen, see Section 5.3
“Basics of Operation”. Enter information used for these
operations in the resulting Track and Balance related screens.
To Next Page
Loading...
