Honeywell Vibrex 2000 - Enhanced Vibrex 2000 Plus Specifications

Chapter 2 – System Overview
Honeywell Confidential: Use or disclosure of information on this page is subject to the restrictions on the title page.
13841 Rev A
21
2.3.3 Enhanced Vibrex 2000 Plus
Specifications
The table, starting below, lists complete technical specifications
for the Enhanced Vibrex 2000 Plus system.
Characteristic
Specifications
Basic Specifications
Data storage capacity
1 Mb
Built-in test (BIT)
coverage
Memory check and calibration on power
up; user-initiated tests (with STATUS key)
check battery and sensor power
NOTE: Errors are logged to a
printable fault log.
Date and time stamping
Yes
Log (data) files -
contents and formats
Balance jobs, log book, balance, spectrum,
fault log, all in ASCII format
Compatible software
(ground based)
Honeywell V2K Download and V2K Plot
programs
Basic Performance
Frequency range
0 to 10,000 Hz
Accuracy
±.5dB, from 5 Hz to 500 Hz; ±1dB, from
500 Hz to 10,000 Hz
Acquisition capability
4 vibration and 2 tachometer (azimuth)
Balance Measurements
Phase units
Hours and minutes
Phase resolution
2 min or 1°