Chapter 5 – General Operation
Honeywell Confidential: Use or disclosure of information on this page is subject to the restrictions on the title page.
13841 Rev A
170
7. Once completed a measurement screen will be displayed:
Note the flight regime and measurement direction and
use GO BACK if corrections need to be made.
Press the [ANNOTATE] context key to annotate this run.
Entering annotation is done similar to the method
described in paragraph 5.4.1.1, ”Entering Aircraft IDs”.
If desired, the annotate feature can be used to indicate
tail or serial number. The annotation is carried through
from run to run if it is not changed.
Press the REDO MEAS context key if you want to verify
measurement stability or otherwise retake this
measurement.
Press the START key to proceed to the BAL MEAS
QUALITY screen.
RUN 1 BAL MEAS
14NOV14 10:50:15 #1A
► [ANNOTATE]
100% Ground M/R L
0.28 IPS @ 10:35
384 RPM
► REDO MEAS
if OK, push START
To Next Page
Loading...
