Chapter 3 – Getting Started
Honeywell Confidential: Use or disclosure of information on this page is subject to the restrictions on the title page.
13841 Rev A
43
Download Vibrex 2000 or Vibrex 2000 Plus data, using the V2K
Download Software program, as follows:
1. Connect the Vibrex unit to your PC, using the 9-pin DBA
female connector to a 9-pin DBA female connector. This is
called a straight- through cable connection (see the diagram
Section 3.3.2 Printing With a PC).
2. Run the V2K Download software in your PC.
3. Power up the Vibrex unit.
4. Click on the OPEN NEW button in the V2K Download
software.
5. Type in the name of the file you wish to contain the data,
then click on OPEN.
6. Click on CAPTURE FROM V2K.
7. At the Vibrex unit, select the data to be stored from the Print
or Review menu.
8. Press PRINT or START.
9. Downloaded data is displayed on screen. Data is now stored
in the PC for later use.
CAUTION: Attempting to download data without the V2K
Download Software program is cumbersome and may
result in lost data. Contact your Honeywell provider for
ordering information for this program, if you do not
already have it.
For more details on how to download data to a PC, see the V2K
Download Software User Guide.
The following example shows an annotated sample Vibrex unit
printout on hard copy:
To Next Page
Loading...
Need help?
General
